Gas Clip SGC Plus Single Gas Monitor for CO

Single Gas Clip Plus

Two Year Maintenance Free Monitor with Hybernation Mode

The Single Gas Clip Plus (SGC Plus), is a maintenance free handheld single gas detector with built in “Hibernate” mode for detecting hydrogen sulfide H2S or carbon monoxide CO. By hibernating the detector when not needed, you can spread 2 years of use over a 3 year period. This mode can only be enabled via IR communication with either the IR Link or SGC Dock. Only authorized personnel can place the detectors in “hibernate” mode.

Ideal Solution for Seasonal or Turnaround Contractors

When your job or turnaround is finished, simply synchronize the instrument with our GCT IR Link or SGC Dock to put the detector in a rested state. When you are ready to use the detector again, simply press the power button to reactivate.

Sensors:

Carbon Monoxide (CO) Measuring range: 0-300 ppm  (Low alarm limit: 35 ppm / High alarm limit: 200 ppm)

Hydorgen Sulfide (H2S) Measuring range: 0-100 ppm (Low alarm limit: 10 ppm / High alarm limit: 15 ppm)

Features:

• Unmatched sensor reliability for hydrogen sulfide (Hâ‚‚S) and carbon monoxide (CO)
• “Hibernate” mode
• Adjustable alarm set points
• Real-time gas reading capability
• 0.1 ppm resolution for H2S sensor and display
• Two-way IR communication for event downloads, bump tests, detector configuration and firmware updates
• Programmable unique 6 digit detector identification
• Bump Test notification and confirmation when intervals are set
• Calibration optional
• Calibration notification and confirmation when intervals are set
• Docking capability with Gas Clip Technologies SGC Dock