Gas Clip SGC Single Gas Monitor for H2S

Reliability portable in the harshest of working conditions

GasClip's Single Gas Clip monitor offers a reliable portable solution to single gas detection for H2S, CO or O2, ensuring constant protection against toxic gas in the harshest of working conditions.

Enhance customer safety with the latest technology

Bump Check Reminder: All Single Gas Clip models come standard with the bump check reminder feature. When activated, if the detector has not been bump tested within the designated interval, the instrument will emit both a flash and show “buP” across the screen alerting the user, peer, or supervisor that the gas bump test is due. In addition to the flash, the TEST Icon will continually display in the upper left hand corner. This alert increases user accountability and allows for easier policy enforcement. Note the flash feature can be disabled within the IR Link software, if desired.

Programmable unique 6 digit ID: Considering the rugged environment these instruments are often exposed to and used in, identification via serial number, sticker, or marker can be unreliable. With the unique ID feature, units can be identified with a simple push of a button. Available using both limited alpha and full numeric characters, each unit can be assigned a unique ID utilizing, for example an employee ID number, last 4 digits of SSN, or a job code. Unique ID’s will also appear on event log reports and bump test logs. ID’s will be displayed on the detector screen in segments of 3 digits at a time (first 3 digits, then last 3 digits).

Adjustable alarm set points: To adapt with changing health and safety gas exposure regulations for workers in industrial environments, the Single Gas Clip alarm set points can be easily adjusted via the IR Link software or through the SGC Dock. Detectors can also be special ordered with custom alarm set points. Please contact your Gas Clip Technologies representative for more information.

Features:

• Unmatched sensor reliability for H2S, CO, & O2
• Adjustable alarm set points
• Real-time gas reading capability
• 0.1 ppm resolution for H2S sensor and display
• Two-way IR communication for event downloads, bump tests & updates
• Programmable unit identification
• Calibration optional
• “Bump check” confirmation/identification

Specifications:

• Size: 3.4 H x 1.9 W x 1.1 D in. (85.5 x 48 x 29 mm.)
• Weight: 2.7 oz. (76g)
• Humidity: 5% to 95% RH (non-condensing)
• Battery Life: Two Years
• Alarms: Visual, vibrating & audible (minimum 95 dB), Detector life countdown (EOL), Low, High & Over limit (OL)
• Display: High viewing angle Alphanumeric Liquid Crystal Display
• Logs: 25 Events - newer events replace older events
• Tests: Full function self-test upon activation and every 20 hours Continuous automatic battery tests
• Temperature: H2S: -40°C to +50°C/-40°F to +122°F, CO: -40°C to +50°C/-40°F to +122°F & O2: -35°C to +50°C/-31°F to +122°F
• Ratings: EMC Directive 2004/108/EC IP 67
• Sensor Type: H2S, CO & O2 - Plug-in electrochemical cell

Customizable User Options Made Easy:

• Custom user message
• Bump due LED
• Bump test interval
• Calibration gas percentage
• Calibration interval
• Display real-time gas
• readings or time remaining
• Self-test interval
• Low alarm set point
• High alarm set point