Fixed Gas Detector

In any industry it would be a mistake to overlook fixed gas detection. The need to track the air quality in your environment is especially important.

You might be in a factory with machines that can produce noxious gases. Or you could be in a warehouse using air quality monitoring. In either case Concept Controls is here to assist.

At Concept Controls we have decades of experience working in gas safety. Without a doubt this gives us the knowledge and connections to ensure you receive the equipment you need.

Our partnerships with Honeywell, a leader in gas detection, and Aeroqual, a leader in environmental monitoring, also allow us to offer an option to suit your needs.

We options ranging from sensors, controllers, relays and all in one systems. This variety significantly increases your opportunity to find a flexible solution

At one end of the spectrum the low cost Aeroqual SM70 indoor air monitor will allow you to watch ozone levels in a specific place.

On the other hand the E3Point System offers a scalable solution. With it you can watch out for toxic and combustible gases throughout an entire facility.

If you have any questions you can speak to an expert with Concept Controls. They can give you an in depth look at our Fixed Gas Detectors. Together you can find the right fit. Please call us at 1-800-793-9548.

...read more

View as Grid List

Items 1 - 12 of 27

Page
per page
Set Descending Direction
  1. E³Point - Toxic & Combustible Gas Monitor

    By: Honeywell
    Part #: E3-GP
    Availabilty: Please call to confirm inventory
    Call to Order
  2. Sensepoint Toxic Sensor, Hydrogen (H2) 0-1,000 ppm

    By: Honeywell
    Part #: SPXCDULNG-GP
    Availabilty: Ships in 10-15 Business Days
    Call to Order
  3. S301-D2 Explosion Proof Sensor

    By: Honeywell
    Part #: S301D2-GP
    Availabilty: Please call to confirm inventory
    Call to Order
  4. E³Point Remote Gas Sensor

    By: Honeywell
    Part #: 1309A00-GP
    Availabilty: Please call to confirm inventory
    Call to Order
  5. 301-EM Controller

    By: Honeywell
    Part #: 301-EM-GP
    Availabilty: Please call to confirm inventory
    Call to Order
  6. 420I Digital Analog Output Converter (Modbus RS-485 to 4-20mA)

    Communicates digitally with Vulcain transmitters within a true daisy chain network, converting the digital signals to analog outputs.
    By: Honeywell
    Part #: 420-I
    Availabilty: Please call to confirm inventory
    Call to Order
  7. 301R Relay Module with 8 Relays, Failsafe

    Acts as an output to the 301C, the Relay Module provides 8 DPDT relays for the indirect activation of fans, louvers, etc. at programmable alarm levels.
    By: Honeywell
    Part #: 301-R8-FS
    Availabilty: Please call to confirm inventory
    Call to Order
  8. 301R Relay Module with 8 Relays

    Acts as an output to the 301C, the Relay Module provides 8 DPDT relays for the indirect activation of fans, louvers, etc. at programmable alarm levels.
    By: Honeywell
    Part #: 301-R8
    Availabilty: Please call to confirm inventory
    Call to Order
  9. 301C Controller (with Datalogger, BACnet/IP Output), Plastic Enclosure

    Designed for simple installation and operation, the 301C continuously monitors and controls toxic gases, combustible gases and oxygen hazards.
    By: Honeywell
    Part #: 301-C-DLC-BIP
    Availabilty: Please call to confirm inventory
    Call to Order
  10. 301C Controller (with Datalogger), Plastic Enclosure

    Designed for simple installation and operation, the 301C continuously monitors and controls toxic gases, combustible gases and oxygen hazards.
    By: Honeywell
    Part #: 301-C-DLC
    Availabilty: Please call to confirm inventory
    Call to Order
  11. 301C Controller, Plastic Enclosure

    Designed for simple installation and operation, the 301C continuously monitors and controls toxic gases, combustible gases and oxygen hazards.
    By: Honeywell
    Part #: 301-C
    Availabilty: Please call to confirm inventory
    Call to Order
  12. Annunciator Panel for 301C Controller

    The 301AP is the latest generation of remote annunciator panels, incorporating all (previously existing) functionalities, such as the easy to read visual indicators, multiple alarm level displays and fault alarms. The 301AP displays readings from the 301C controller with no user programming required.  The 301AP also has 3 relays that can be activated from the 301C, according to specifications configured on the controller.
    By: Honeywell
    Part #: 301-AP
    Availabilty: Please call to confirm inventory
    Call to Order
View as Grid List

Items 1 - 12 of 27

Page
per page
Set Descending Direction

Menu

Language

Copyright © 2020 Concept Controls Inc.