Sampling Pumps

View as Grid List

9 Items

per page
Set Descending Direction
  1. Waterra PowerPump-2

    The PowerPump-2 is the most powerful pump actuator manufactured by Waterra and is the ideal solution for applications with extreme pumping requirements. Powered by a Honda GX100, 3 horsepower, 4 stroke, gasoline motor gives this actuator the power to generate a 6-inch stroke which can operate both the Standard Flow System and High Flow System to their maximum effective depths.

    By: Waterra
    Part #: RN-POWER-PUMP-2
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  2. Waterra Spectra Field-Pro Peristaltic Pump 

    The Spectra Field-Pro Peristaltic Pump features a heavy-duty, all-inclusive design. This means no external cables, chargers or batteries to worry about. Suction lifts up to 8.5 m (27 feet). Rugged design makes the Field-Pro the ideal solution for field use. Weighing in at 29lbs/13 kg (including the battery), the Spectra Field-Pro Peristaltic Pump is a powder coated aluminum case with heavy duty latches, hinges and handle. The case has a built-in storage compartment which can hold a field book as well as the two power cables that come with the Field-Pro.

    By: Waterra
    Part #: RN-SPECTRA-PERISTALTIC-PUMP
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  3. Solinst 407 Low-Flow 12V Compressor (c/w Battery Clips) 

    The Solinst 12 volt oil-less air compressor is lightweight 21 lbs (9.5 kg), compact, and ideal for field use, especially low flow applications of less than 30 m (100 ft) depths. The compressor operates using 12 volt DC power source, such as a car or truck vehicle battery, and comes with alligator clips. The compressor operates at up to 125 psi and is equipped with a 2 US gallon (7.6 L) air tank which is rated to 150 psi.

    By: Solinst
    Part #: RN-SOLINST407-12VCOMP
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  4. Solinst 410 Peristaltic Pump with Battery 

    The Solinst Peristaltic Pump Model 410 is designed for field use, the reversible flow Peristaltic Pump from Solinst is ideal for vapor sampling or water sampling from shallow wells and surface water. It can be used for vacuum pumping and for pressure delivery of liquids or gases. The Peristaltic Pump is compact and lightweight. A handle and one convenient control on the top of the pump make it perfect for fieldwork.

    By: Solinst
    Part #: RN-PERISTALTIC-410PUMP
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  5. GeoTech Spare 12V battery w/ charger 

    Geotech Modular Battery Pack Rechargeable 12 Volt for use with Geo Control Pro Controller and Geopump Peristaltic Pump will provide unequaled rechargeable performance. This sealed lead acid battery offers a unique design that provides a long service life, allowing the battery to be recharged up to 1,000 times. The high impact polycarbonate case takes punishing use making the ideal solution for many field applications where durability and long run-times are required.

    By: GeoTech
    Part #: RN-GEOTECH-12VBATTERY
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  6. Geotech Portable Bladder Pumps

    The Geotech Bladder Pump was designed with groundwater sampling as it's main purpose. They are constructed with easy-to-clean #316 stainless steel and trouble-free PTFE bladders to ensure durability and sample integrity. Both low flow rates for sampling and higher flow rates for purging are possible with the Geotech Bladder Pump.

    By: GeoTech
    Part #: R-N-BLADDER-PUMP-2INCH
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  7. GeoTech GeoControl Pro

    The GeoTech offers the ultimate in bladder pump portability, take a close look at the Geotech geocontrol PRO. It combines a mini-compressor inside the controller! Leave the heavy compressors and air tanks behind because you can carry the Geocontrol PRO with one hand. Powered by 12 Volt DC, it can sample from depths to 55 meters (180') with low flow pumping rates.

    By: GeoTech
    Part #: RN-GEOCONTROL-PRO
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  8. GeoTech GeoPump Series II Peristaltic Pump (complete with Battery) 

    The Geotech Geopump Series II Peristaltic Pumps is designed for single and multi-stage pressure or vacuum pumping of liquids. It operates by mechanical peristalsis, so the sample only comes in contact with the tubing. This allows for consistent sample integrity as well as easy cleaning and replacement. The Geopump is ideally suited for field sample removal from shallow wells and all surface water sources or for laboratory use.

     

    By: GeoTech
    Part #: RN-GEOPUMP-SERIES-II
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
  9. Waterra Hydrolift II Pump – Tubing Actuator (WHLP-II)

    The Hydrolift-2 is a portable, electrically powered pump used to automate the operation of the Inertial Pump. The Hydrolift is powered by a 3/4 horsepower electric motor available in either 110 volt or 220 volt and generates a 4-inch stroke up to 200 cycles per minute. This actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 150 feet. This actuator is the ideal solution for applications with moderate to extreme pumping requirements when the use of an Inertial Pumping System is required.

    By: Waterra
    Part #: RN-WHLP-II
    Availabilty: Rental Options: Daily, Weekly, Monthly
    Call to Order
View as Grid List

9 Items

per page
Set Descending Direction

Language

Copyright © 2020 Concept Controls Inc.