Toggle Nav
My Cart
Menu
Account

RKI Eagle 2 Gas Detector

RKI Instruments

RKI Instruments

RN-EAGLE-2

main product photo
Call to Order
Rental Options: Daily, Weekly, Monthly

The RKI EAGLE 2 offers an ergonomic design with easy access to controls such as autocalibration, alarm silence, demand zero, peak hold, methane elimination, and a wide variety of other great features. Built to withstand some of the harshest environments with the best reliability and performance, you can count on the RKI EAGLE 2 to ensure your workers remain safe while getting the job done.

not_listed_location

Questions about this product?

Speak to an expert

call mail

RKI Eagle 2 Gas Detector

The RKI EAGLE 2 multi gas detector offers a variety of convenient features including a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases. It also allows you to measure in % volume for CH4 and H2 using a TC (thermal conductivity) sensor. Hydrocarbons are also easily measured in PPM or LEL at the push of a button while infrared sensors allow for detecting CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges, for Environmental applications there is a methane elimination feature. The EAGLE 2 also has a powerful built in pump that is capable of drawing samples from as far as 125 feet. With its easy to use interface, rugged design and reliable detection principals makes the EAGLE 2 the ideal monitor for most applications that require a portable gas detection solution.

Features

  • Monitor up to 6 different gases
  • PPM, % LEL, or % Vol. auto-ranging combustible detection
  • Specialty Sensors
    • PID (Photoionization Detector)

      • Low or high range for VOC detection

      • Fence Electrode Technology for humidity and contamination resistance

  • Infrared (IR) CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC

  • Thermal Conductivity (TC) % Vol. H2, % Vol. CH4

  • Smart toxic, plug and play sensors NH3, AsH3, Cl2, HCN, PH3, & SO2

  • Hydrogen specific LEL / ppm sensor

  • Powerful long-life pump up to 125’ range
  • Low flow pump shut off and alarm
  • Methane elimination for environmental use
  • Alkaline 18 hours or NiMH 20 hours capability
  • Password protection
  • Internal hydrophobic dust filter
  • External probe with hydrophobic filter
  • Multilingual (5 languages)
  • Ergonomic RFI / EMI / chemical / weather resistant enclosure
  • Intrinsically safe design, CSA approval
  • Datalogging standard

Specialty Sensors

The PID sensor is capable of detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases. Other smart sensors include % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges; Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications; and a variety of super toxic gases. EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Made In U.S.A

  • PID (Photoionization Detector)
    • Low or high range for VOC detection
    • Humidity and contamination resistant
  • Infrared (IR) CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC
  • Thermal Conductivity (TC) % Vol. H2, % Vol. CH4
  • Smart toxic, plug and play sensors NH3, AsH3, Cl2, HCN, PH3, & SO2

Specifications

Enclosure Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64.
Dimensions 9.5” L x 5.25” W x 5.875” H
Weight 3.8 Lbs (standard 4 gas with batteries).
Detection Principle Catalytic combustion, electrochemical cell, galvanic cell, infrared, Photoionization detector, and thermal conductivity.
Sampling Method Powerful, long-life internal pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH.
Display 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand, with adjustable time.
Language Readout can display in 5 languages (English, French, German, Italian, or Spanish).
Alarms 2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.
Alarm Method Buzzer 95 dB at 30 cm, four high intensity LED’s.
Controls 4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features.
Continuous Operation At 70°F, 18 hours using alkaline batteries, or 20 hours using NiMH.
Power Source 4 alkaline or NiMH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
Operating Temp. & Humidity -20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing.
Environmental IP-64
Response Time 30 Seconds to 90% (for most gases) using standard 5 ft hose.
Safety Rating Intrinsically Safe, Class I, Groups A, B, C, D. Approvals: CSA / CE
Standard Accessories Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter.
Optional Accessories • Dilution fitting (50/50) • NiMH batteries • Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) • Continuous operation adapter, 115 VAC or 12 VDC • Extension hoses • IRDA cable for datalogging download
Warranty Two year material and workmanship, one year for PID sensor.

Gases & Detectable Ranges

Gas Measuring Range Accuracy * Which ever is greater
Gases & Detectable Ranges
Standard Confined Space Gases
Hydrocarbons (CH4, std) 0 – 100% LEL ± 5% of reading or ± 2% LEL (*)
0 – 5% Vol. (CH4)
0 – 50,000 ppm ± 50 ppm or ± 5% of reading (*)
Oxygen (O2) 0 – 40% Vol. ± 0.5% O2
Carbon Monoxide (CO) 0 – 500 ppm ± 5% of reading or ± 5 ppm CO (*)
Hydrogen Sulfide (H2S) 0 – 100 ppm ± 5% of reading or ± 2 ppm H2S (*)
Toxics
Ammonia (NH3) 0 – 75 ppm ± 10% of reading or ± 5% of full scale (*)
Arsine (AsH3) 0 – 1.5 ppm
Chlorine (Cl2) 0 – 3 ppm
Hydrogen Cyanide (HCN) 0 – 15 ppm
Phosphine (PH3) 0 – 1 ppm
Sulfur Dioxide (SO2) 0 – 6 ppm
IR Sensors
Carbon Dioxide (CO2) 0 – 10,000 ppm 0 – 5% Vol. 0 – 60% Vol. ± 5% of reading or ± 2% of full scale (*)
Methane (CH4) 0 – 100% LEL/ 0 – 100% Vol.
Hydrocarbons 0 – 100% LEL/ 0 – 30% Vol.
PID Sensors
VOC 0 – 2,000 ppm 0 – 50 ppm —
TC Sensors
Methane (CH4) 0 – 100% Vol. ± 5% of reading or ± 2% of full scale (*)
Hydrogen (H2) 0 – 10% Vol. 0 – 100% Vol.
Hydrogen Specific
Hydrogen (H2) 0-100% LEL 0-40,000 ppm ± 5% of reading or ± 2% of full scale (*)

More Information

More Information
PN RN-EAGLE-2
Manufacturer RKI Instruments
Copyright © 2021 Concept Controls Inc.